Printing submenu – HP LaserJet 9040.9050 Multifunction Printer series User Manual
Page 204
200 Appendix B Control panel menus
ENWW
Printing submenu
Some items in this menu are available from a software application, or from the driver (if the
appropriate driver is installed). Driver and program settings override control-panel settings. For
more information, see
Using features in the printer driver
.
Item
Values
Explanation
COPIES=1
1
to
32,000
Set the default number of copies by selecting any number
from
1
to
32,000
. Use the numeric keypad to select the
number of copies.
Note
It is best to set the number of copies from the driver or
software program. (Driver and software settings override
control-panel settings.)
DEFAULT PAPER
SIZE=
LETTER
LETTER
LEGAL
A4
EXECUTIVE
11X17
A3
B4(JIS)
B5(JIS)
CUSTOM
A5
LETTER ROTATED
STATEMENT
8.5X13
12X18
A4 ROTATED
RA3
EXECUTIVE(JIS)
DPOSTCARDS(JIS)
8K
16k
ENVELOPE #10
ENVELOPE MONARCH
ENVELOPE C5
ENVELOPE DL
ENVELOPE B5
Set the default image size for paper and envelopes. (The
item name will change from paper to envelope as you
scroll through the available sizes.)
DEFAULT CUSTOM
PAPER SIZE
UNIT OF MEASURE
X DIMENSION
Y DIMENSION
Allows the user to set a custom paper size for any of the
installed trays. Substitute the tray number for <N>. This
menu only appears when the selected tray custom switch
is in the custom size position. The user selects the X and Y
dimensions of the custom paper size using the ruler labels
in the trays.
PAPER
DESTINATION
UPPER BIN
LOWER BIN
LOWER BOOKLET BIN
BINS 1-8
Allows the user to configure the output paper bin
destination. Only installed bins will appear on the menu.
The default is the first face-down bin of the output device.
DUPLEX=OFF
OFF
ON
Set the value to
ON
to print on both sides (duplex) or
OFF
to
print on one side (simplex) of a sheet of paper.
For more information, see