HP LaserJet 9040.9050 Multifunction Printer series User Manual
Page 150
146 Chapter 10 Problem solving
ENWW
Canceling...
<JOBNAME>
The MFP is cancelling a job. The message continues while the job is stopped,
the paper path is flushed, and any remaining incoming data on the active data
channel is received and discarded.
CARD SLOT X NOT
FUNCTIONAL
The compact flash card in the specified slot is not working correctly.
CARTRIDGE
FAILURE
Return for
Replacement
The cartridge is loaded and the shipping protection strip cannot be fully
removed.
Return the cartridge for a new one. (See
, or go to
.hp.com/support/lj9040mfp
CARTRIDGE OUT
REPLACE
CARTRIDGE
The cartridge does not contain any more toner. Printing cannot continue
because damage to the MFP might result. Replace the print cartridge.
CHECK CABLES
Then turn off
then on
Make sure that the cable between the scanner and the MFP is connected.
If the error persists, replace the cable.
CHECK CABLES
CHECK SCANNER
LOCK
To continue turn
off then on
Make sure that the scanner is unlocked and the interface cable is seated
correctly.
CHECK COPY
CONNECT CARD
Make sure that the Copy Connect board on the formatter is firmly in place.
Check for LED light activity on the Copy Connect board.
If the problem persists, replace the Copy Connect board.
Check the glass
and remove any
paper, then
press START
A digital send or copy job has been performed from the scanner glass, but the
original document needs to be removed.
Checking paper
path
The MFP rollers are rotating to check for possible jams.
CHOSEN
PERSONALITY NOT
AVAILABLE
To continue
touch OK
A print job requested a MFP language (personality) that does is not available in
this MFP. The job will not print and will be cleared from memory.
Print the job by using a driver for a different printer language, or add the
requested language to the MFP (if possible).
CLEANING DISK
<X>% Complete
Do not power
off.
The hard disk or compact flash disk is being cleaned. Contact the network
administrator.
CLOSE FLATBED
COVER DURING
INITIALIZATION
Close the top cover before turning on the MFP.
Message
Explanation or recommended action