HP LaserJet 9040.9050 Multifunction Printer series User Manual
Page 173
ENWW
Software, computer, and product interface problems 169
The Macintosh computer is
not communicating with the
MFP.
●
Make sure the control panel displays
READY
.
●
Make sure the correct driver is selected in the left half of the
Chooser. Then make sure that the required MFP name is selected
(highlighted) on the right half of the Chooser. There will be an icon
next to the MFP name after the driver has been set up and
configured with the PPD.
●
If the MFP resides on a network with multiple zones, make sure
the correct zone is selected in the AppleTalk Zones box in the
Chooser.
●
Make sure the correct MFP has been selected in the Chooser by
printing a configuration page (see
). Make sure
the name of the MFP displayed on the configuration page matches
the MFP in the Chooser.
●
Make sure AppleTalk is active. (Select this in the Chooser or in
the AppleTalk control panel, whichever is applicable for your OS
version.)
●
Make sure the computer and MFP are on the same network. From
Control Panels in the Apple menu, select the Network (or the
AppleTalk) control panel and then choose the correct network (for
example, LocalTalk or EtherTalk).
The driver icon does not
appear in the Chooser.
●
Make sure the Apple LaserWriter 8 Chooser extension resides in
the Extensions folder. If it is not present anywhere on your system,
you can obtain the driver from your Macintosh OS system software
CD, from Apple Computer, Inc., or see the HP support flyer, or go
www.hp.com/support/lj9040mfp
or
www.hp.com/support/
lj9050mfp
.
Situation
Solution