HP LaserJet 9040.9050 Multifunction Printer series - Manual (Page 211)

ENWW Configure device menu 207
I/O submenu
Items in the I/O (input/output) menu affect the communication between the MFP and the
computer.
Parallel input submenu
EIO X Jetdirect submenu
The EIO (enhanced input/output) submenu appears only when an EIO device is installed in an
EIO slot on the MFP (such as an HP Jetdirect print server). The items in the menu depend on the
particular accessory product installed. If the MFP contains an HP Jetdirect print server EIO card,
you can configure basic networking parameters using the EIO menu. These and other
parameters can also be configured through HP Web Jetadmin or other network configuration
tools (such as by using Telnet or browsing the embedded Web server).
For more information about the EIO submenu, see the documentation that came with the
EIO Jetdirect card.
Item Values Explanation
I/O TIMEOUT=15 5-300 Use this to select the I/O timeout period in seconds. (I/O timeout
refers to the time, measured in seconds, that the MFP waits
before ending a print job.)
This setting allows you to adjust timeout for best performance. If
data from other ports appear in the middle of your print job,
increase the timeout value.
Item Values Explanation
HIGH SPEED=YES YES
NO Accepts faster parallel communications used for connections with
newer computers.
ADVANCED
FUNCTIONS=ON ON
OFF Turn the bidirectional parallel communication on or off. The default
is set for a bidirectional parallel port (IEEE-1284).
This setting allows the MFP to send status readback messages to
the computer. (Turning the parallel advanced functions on might
slow language switching.)