Mfp memory and expansion, Overview, Determining memory requirements – HP LaserJet 9040.9050 Multifunction Printer series User Manual
Page 217: Appendix c mfp memory and expansion, Overview determining memory requirements
ENWW
Overview 213
C
MFP memory and expansion
Overview
This appendix includes:
●
Determining memory requirements
●
●
●
Saving resources (permanent resources)
●
The MFP has two double data rate (DDR) DIMM slots to provide more MFP memory. DDR
DIMMs are available in 16, 32, 64, 128, and 256 MB, for a maximum of 512 MB.
The MFP has two compact flash slots to provide the following features:
●
Flash memory cards, available in 16, 32, and 64 MB. Unlike standard MFP memory,
compact flash memory can be used to permanently store downloaded items in the MFP,
even when the MFP is off. The MFP supports Type 1 and Type 2 compact flash memory.
●
To add flash-based memory accessory fonts, macros, and patterns, use the appropriate
DDR DIMM.
●
To add other flash-based printer languages and MFP options, use the appropriate DDR
DIMM.
Note
Single in line memory modules (SIMMs) used on previous HP LaserJet products are not
compatible with this MFP.
For ordering information, see
, or go t
Determining memory requirements
The amount of memory you need depends on the types of documents you print. Your MFP can
print most text and graphics at 1,200 dpi FastRes without additional memory.
You might want to add more memory to the MFP if you often print complex graphics or PS
documents, print two-sided documents (duplex printing), use many downloaded fonts, or print
large paper sizes (such as A3, B4, or 11 x 17).