HP LaserJet 9040.9050 Multifunction Printer series - Manual (Page 16)

12 Chapter 1 The basics ENWW
Memory, fonts,
and mass
storage SDRAM Double
Data Rate (DDR)
memory DIMMs
(100-pin) The MFP has two memory DIMM slots.
One is used by factory-installed
memory.
Improves the ability of the MFP to
handle large and stored jobs (maximum
512 MB with HP brand DDR DIMMs).
32 MB
64 MB
128 MB
256 MB
512 MB Q3982A
Q2625A
Q2626A
C2627A
C2628A
Flash memory
cards
(100-pin) Permanent storage for fonts and forms.
The MFP supports Type 1 and Type 2
compact flash memory cards.
16 MB
32 MB
64 MB Q2634A
Q2635A
Q2636A
EIO hard disk Provides an additional 20 gigabytes
(GB) of permanent storage for fonts
and forms. J6073A
Cable and
interface
accessories Enhanced EIO
Cards ● HP Jetdirect Connectivity Card for
USB, serial, and LocalTalk
connectivity
● HP Jetdirect 615N Print Server for
Fast Ethernet (10/100Base-TX)
networks (RJ-45 only)
● HP 680N Wireless 802.11b
connectivity
● HP Jetdirect 625N Print Server for
Fast Ethernet
(10/100/1000Base-TX networks)
J4135A
J6057A
J6058A
J7960A
Analog fax ● A customer-installable accessory
that enables the MFP to function as
a stand-alone analog fax machine. Q3701A
Additional
software
features HP Digital Sending
Software A software accessory with enhanced
digital sending features including
network authentication. T196AA
Maintenance kit Printer
maintenance kit The kit contains two Type 1 rollers,
seven Type 2 rollers, one transfer roller
assembly, and one fuser assembly. C9152A
(110 volt)
C9153A
(220 volt)
Type of item Item Description or use Order
number