HP LaserJet 9040.9050 Multifunction Printer series - Manual (Page 213)

ENWW Configure device menu 209
TCP/IP DEFAULT IP
PRIMARY
DNS
SECONDARY
DNS
PROXY
SERVER
PROXY PORT
AUTO IP
LEGACY
.
A link-local IP address 169.254.x.x will be set.
The address 192.0.0.192 will be set, consistent
with older Jetdirect products.
Specify the IP address (n.n.n.n) of the Primary
Domain Name System (DNS) Server.
Specify the IP address (n.n.n.n) of the Secondary
Domain Name System (DNS) Server.
Specifies the proxy server to be used by embedded
applications in your MFP. A proxy server is typically
used by network clients for Internet access. It
caches Web pages, and provides a degree of
Internet security, for those clients.
To specify a proxy server, enter its IP address or
fully-qualified domain name. The name can be up
to 64 characters.
For some networks, you may need to contact your
Independent Service Provider (ISP) for the proxy
server address.
Enter the port number used by the proxy server for
client support. The port number identifies the port
reserved for proxy activity on your network, and can
be a value from 0 to 65535.
IPX/SPX ENABLE
FRAME TYPE
ON
OFF
AUTO
EN_8023
EN_II
EN_8022
EN_SNAP
Enable the IPX/SPX protocol.
Disable the IPX/SPX protocol.
Selects the frame type setting for your network.
AUTO (default) Automatically sets and limits the
frame type to the first one detected.
Frame type selections for Ethernet networks.
APPLETALK ENABLE ON
OFF Enable or disable the AppleTalk protocol.
DLC/LLC ENABLE ON
OFF Enable or disable the DLC/LLC protocol.
Item Options Values Explanation