Selecting the output bin – HP LaserJet 9040.9050 Multifunction Printer series User Manual
Page 58
54 Chapter 3 Printing
ENWW
Selecting the output bin
The MFP has at least two output bin locations: the ADF output bin (1) and the output bin on the
on the output device (2).
It is recommended that you select an output location through the software program or printer
driver. For more information, see
.
In addition to the output locations on the output devices, the MFP has an ADF output bin (
1
).
Stacker or stacker/stapler output bins
If you choose the 3,000-sheet stacker or 3,000-sheet stacker/stapler, the output bins are the
upper bin (
2
) (face up) and the lower bin (
3
) (face down).
The upper bin (face-up) (
2
) is the top bin on the stacker or stacker/stapler. This bin holds up to
100 sheets of paper in face-up order as they exit the MFP. A sensor causes the product to stop
when the bin is full. Product operation continues when you empty or reduce the amount of paper
in the bin.
The lower bin (face-down) (
3
) is the lower bin on the stacker or stacker/stapler. This bin holds up
to 3,000 sheets of paper and allows you to stack or staple jobs. This bin is the default output bin.
8-bin mailbox output bins
If you choose the 8-bin mailbox, the output bins are the upper bin and the eight face-down bins.
The upper bin (
4
) holds up to 125 sheets of paper.
The network administrator can assign the eight bins (
5
) to individual users or workgroups. Each
bin can stack up to 250 sheets of paper.
Multifunction finisher output bins
If you choose the multifunction finisher, the output bins are the upper bin (
6
) and the lower
booklet bin (
7
).
The upper bin (
6
) is the top bin on the multifunction finisher. This bin provides 1,000 sheets of
stacking capacity, and can offset each job as it is stacked, delivering unstapled jobs face up or
face down. This bin also provides stapling for up to 50 sheets of paper per document. The
upper bin is the default output bin when the multifunction finisher is attached.
The lower booklet bin (
7
) is the lower bin on the multifunction finisher. This bin provides folding
and saddle stitching of booklets for up to 10 sheets of paper.
1
1
1
2
1
6
1
7
1
4
1
5
1
3