HP LaserJet 9040.9050 Multifunction Printer series - Manual (Page 128)

124 Chapter 10 Problem solving ENWW
3 Open the jam access cover. Pull out and lift the green tab.
4 Remove any media from this area by pulling it out of the MFP.
5 Push the green lever down to the original position.
6 Close the right door.
To clear jams in Trays 2 and 3
1 Open the tray until it stops.
2 Check for media in the tray area, and remove any media from this area. Carefully check to be
sure you have removed all pieces of torn media.