HP LaserJet 9040.9050 Multifunction Printer series - Manual (Page 33)

ENWW Loading input trays 29
Loading input trays
This section contains information about loading standard- and custom-size media into the four
input trays.
CAUTION To avoid a jam, never add or remove paper from Tray 1 or open Tray 2, Tray 3, or Tray 4 while
printing or copying from that tray.
To avoid damaging the MFP, print labels, envelopes, and transparencies from Tray 1 only. Send
labels, envelopes, and transparencies to the upper bin. Print on only one side of labels, envelopes,
and transparencies.
Loading Tray 1
Tray 1 holds up to 100 sheets of paper or 10 envelopes. For more information about supported
media, see
Media specifications .
To load Tray 1 for occasional one-time use
Use this procedure if Tray 1 is usually left empty and is used for printing on a variety of sizes or
types of paper.
1 Open Tray 1.
2 Load paper according to size and finishing options. See Orienting media for information
about loading preprinted, letterhead, and prepunched paper.
CAUTION To avoid jams, print sheets of labels one sheet at a time.