HP LaserJet 9040.9050 Multifunction Printer series - Manual (Page 235)

ENWW Using control panel menus 231
Using control panel menus
For a complete list of control panel items and possible values, see Control panel menus . when
additional accessories are installed, new menu items automatically appear.
To print a control panel menu map
1 Touch Menu .
2 Touch Information.
3 Touch Print Menu Map .
4 Touch OK to exit the menu.
To change a control panel setting
1 Touch Menu .
2 Scroll to the menu you want and touch it to select it. Depending on the menu, you might have
to repeat this step to select a submenu.
3 Scroll to the item you want and touch it to select it.
4 Scroll to the value you want and touch it to select it. An asterisk ( * ) appears next to the
selection in the display, indicating that it is now the default.
5 Touch OK to exit the menu.
Settings in the driver and software override control panel settings. (Software settings override
driver settings.)
Device Storage Manager
The Device Storage Manager should be installed only on the computer of the system
administrator. The HP Disk Management Utility allows you to control the hard disk and flash
memory features that are not found in the drivers. Bidirectional communication is required.
Note HP Disk Management Utility is not available for the Macintosh. If you are using a Macintosh, these
features are available in the HP LaserJet Utility (version 3.5.1 or later).
Use the HP Disk Management Utility to do the following:
● initialize disk and flash memory
● download to, delete from, and manage fonts on disk and flash memory across networks
● download PostScript Type 1, PostScript Type 42 (TrueType fonts converted to PostScript
format), TrueType, and PCL bitmap fonts. (To download Type 1 fonts, Adobe Type Manager
must be loaded and running.)