HP LaserJet 9040.9050 Multifunction Printer series User Manual
Page 138
Advertising
134 Chapter 10 Problem solving
ENWW
To clear jams in the left door (fuser area)
1
Move the output device away from the MFP to gain access to the left door.
2
Open the left door.
WARNING!
Avoid touching the adjacent fusing area. It can be hot.
3
Remove any jammed or damaged media from this area by pulling it out of the MFP.
4
Press down on the green tab and carefully check for media. Be sure to remove all pieces of
torn media.
Advertising