HID FARGO HDP8500 User Guide - Manual (Page 113)

© 2012 HID Global Corporation. All rights reserved.
113
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Reviewing Information on the Supplies tab
Here are the guidelines for automatic positioning on the Supplies tab.
Step Procedure
1 Use this tab to determine the following information (see below):
Ribbon Level: Type, Reorder Number and Gauge Indicator.
HDP Film Level: Type, Reorder Number and Gauge Indicator.
Lamination - Cartridge 1 Level: Type, Reorder Number and Gauge
Indicator. (Note: This is visible only when the Laminate
– Cartridge 1
is detected.)
Lamination – Cartridge 2 Level: Type, Reorder Number and Gauge
Indicator. (Note: This is visible only when the Laminate – Cartridge 2
is detected.)