HID FARGO HDP8500 User Guide - Manual (Page 173)

© 2012 HID Global Corporation. All rights reserved.
173
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Printer's LCD display.
Card Jam A Card has become
jammed in the Printer. f. Open the Printer's Front Cover
and remove the Print Ribbon
and Film Cartridges.
g. Clear any cards in the printer by
using the Forward and/or Back
Buttons located on the printer‟s
LCD display.
h. Re-insert the Ribbon and close
the Printer‟s Front Cover.
i. Press the Resume button
located on the Printer's LCD
display to continue printing.
j. To Cancel the print, press the
Cancel Print button from the
Driver's display dialog and the
Cancel button located on the
Printer's LCD display.
Card Jam (Encoder) A Card has become
jammed in the Printer's
Encoding station. a. Open the Printer‟s Front Cover
and remove the Print Ribbon.
b. Open the Printer's Flipping
Module Cover.
c. Clear any cards in the Encoding
Module by using the Forward
and/or Back buttons located on
the Printer's LCD display.
d. Re-insert the Print Ribbon and
close the Printer‟s Front Cover.
e. Press the Resume button
located on the Printer's LCD
display to continue printing.
f. To cancel the print, press the
Cancel Print button from the
Driver's display dialog or the
Cancel button located on the
Printer's LCD display.
Card Jam (Flipper) A Card has become
jammed in the Printer's
Flipper Table. a. Open the Printer‟s Front Cover
and the Flipper Module Cover.
b. Clear any cards in the Flipper
Table by using the Forward
and/or Back buttons located on
the Printer's LCD display.