HID FARGO HDP8500 User Guide - Manual (Page 174)

© 2012 HID Global Corporation. All rights reserved.
174
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
c. Close the Printer‟s Front Cover.
d. Press the Resume button
located on the Printer's LCD
display to continue printing.
e. To cancel the print, press the
Cancel Print button from the
Driver's display dialog or the
Cancel button on the Printer's
LCD display.
Card Jam
(Laminator) A Card has become
jammed in the Printer's
Lamination Module. a.
Open the Printer's Module‟s
Front Cover and remove the
Overlaminates.
b. Clear any cards in the
Lamination Module by using the
Forward Arrow and/or Back
Arrow buttons located on the
Printer‟s LCD display. The
Printer‟s Front Cover must be
open for use of the Forward and
Back buttons.
c. Re-insert the Overlaminate(s)
a nd close the Lam Module‟s
Front Cover.
d. Press the Resume button
located on the Printer's LCD
display to continue printing.
e. To cancel the print, press the
Cancel Print button from the
Driver's display dialog or the
Cancel button on the Printer's
LCD display.
Card Eject Error The Printer is unable to
eject a card. Please check Printer for a card jam
or other obstruction and press the
Resume button located on the
Printer's LCD display to continue
printing.
To cancel the print, press the
Cancel Print button from the
Driver's display dialog or the Cancel
button located on the Printer's LCD
display.
Flipper Jam The Flipper Table has
jammed while either
aligning itself or flipping a a. Open the Printer's Flipper
Module Cover.