HID FARGO HDP8500 User Guide - Manual (Page 116)

© 2012 HID Global Corporation. All rights reserved.
116
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Using the Optional Printer Features Group Box
The Default setting is checked.
If checked, upon Configuration tab activation, the Driver retrieves the installed Printer
features information from the Firmware and automatically checks the appropriate check
boxes for Dual Sided, Lamination and Magnetic Encoder.
If checked, the Dual Sided, Laminator, and Magnetic Encoder checkboxes are read only.
If checked and no Printer is found or bi-directional capabilities are disabled or unavailable,
the error message (shown below) is displayed.
If unchecked or cleared, feature check boxes become active and can be manually set.
If the Driver is reinstalled, it resets to the default of checked.
Using the Event Monitoring Group Box
This Event Monitoring group box displays the Low Supplies (Ribbon, Laminate and Film).