HID FARGO HDP8500 User Guide - Manual (Page 19)

© 2012 HID Global Corporation. All rights reserved.
19
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Functional Specifications
Component Description
Card Cartridge Load blank cards into this Cartridge.
Card Output
Hopper Stores 200 cards.
Card
Lamination
Module Works in conjunction with the Printer to apply a variety of different
overlaminates to printed cards, providing increased card durability
and security.
Will laminate in either the single or dual side (simultaneous) process
(Note: When printing a batch of cards, the Printer can be encoding
and printing one card while the Lamination Module laminates another
card.)
Display 3.2” AVGA TFT LCD w/ Resistive Touch Overlay
Printhead The component of the Printer that actually does the printing.
USB Interface Connect to the Windows PC USB port
Hardware
Accessories &
Connectivity Each model has multiple cords and connectors.
US power cord
EU power cord
USB cable (2.0)
Ethernet
Print Modes There are two print modes (Performance and Normal )
Normal print mode (default)
Performance print mode is faster with lower image quality and is
most suitable for minimal color with mostly resin text.
Resin Scramble
(OPTIONAL)
The system can hide any information printed with the resin panel.
Edge-to-Edge
Printing Prints over the edge on CR-80 cards.
Color Profile System Color Management & None