HID FARGO HDP8500 User Guide - Manual (Page 135)

© 2012 HID Global Corporation. All rights reserved.
135
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Using the Film Print Supply Tension Option
IMPORTANT: The Film Drive sets the baseline for the Film Tension and should not be
adjusted by the reseller or the end User.
Adjustments moderately change the image length.)
Using the Cleaning rate Option
The message to clean the printer uses a defaulted number of passes of 3000 and to change this
click up or down one number per one card.
Using the Film Print Cooling Level Option
This controls the speed of the transfer roller cooling fan during the printing process.
This setting should normally be off, but can be turned on to help with splotchy color areas on the
image. Too high fan speed can cause smudge.
Using the Film Transfer Cooling Level Option
This controls the default speed of the cooling fan for the transfer process.
Adjusts fan speeds and on times during transferring. This setting affects both flash and smudge.