Using the ascii offset dropdown list, Using the bit density dropdown list – HID FARGO HDP8500 User Guide User Manual
Page 97
© 2012 HID Global Corporation. All rights reserved.
97
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Using the ASCII Offset dropdown list
Use this option to customize the Character ASCII Offset used to encode the magnetic data on
the currently selected track. (Note: This character-offset value is subtracted from the ASCII
value of each Magnetic Stripe data character prior to encoding on the track.)
Step
Procedure
1
Select NULL to change the ASCII Offset to NULL.
OR
Select SPACE to change the ASCII Offset to SPACE. (Note: This is
the default for Track 1.)
OR
Select ZERO to change the ASCII Offset to ZERO. (Note: This is the
default for Tracks 2 and 3.)
Using the Bit Density dropdown list
Use this option to customize the Bit Recording Density (Bits per Inch) used to encode the
magnetic data on the currently selected track.
The default ISO Standard selections for this option are as follows: