HID FARGO HDP8500 User Guide - Manual (Page 20)

© 2012 HID Global Corporation. All rights reserved.
20
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Card Flattener
(OPTIONAL)
Fully adjustable temp dwell
The card flattening routine occurs after the card is transferred but
before lamination.
The card flattener has an adjustable temp and dwell.
You can select from different offset values from the default temp.
You can select from different offset values from the default dwell.
The card flattener has a 0 to 15 second adjustable delay before
the flattening routine will run.
The driver can disable the card flattener, if a dual sided job is
sent.
Recommended for heat sensitive PVC cards.
Locks Hardware locks are a standard feature.
Mechanical and key locks are used to secure the doors on the
input card cartridges, the access door to the printer, the access
door to the Laminator and the output card Hopper.
The input card cartridges are manually secured to the printer
mechanism via toggle latch located inside the access door of the
printer.
The Printer and Laminator include a compatible hole with a
Kensington lock.
The printer and Laminator include threaded hardware.
Andon Light
(OPTIONAL)
4-Color Andon Light option. Each color is controlled separately. The
four colors indicate the following:
Red: A printer error has occurred or operator intervention is
needed.
Blue: Printer has run out of materials (film, ribbon or cards)
Green: Normal Printer operation.
Orange: User intervention is needed soon. Printer materials are
low or the printer needs to be cleaned.