HID FARGO HDP8500 User Guide - Manual (Page 121)

© 2012 HID Global Corporation. All rights reserved.
121
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Selecting the Calibrate Film tab
Calibrate button: Sends calibrate film command to Printer. Follow the instruction on the
page for setting up the Printer.
Step Procedure
Option1
Select the Calibrate Film tab.
a. Leave the Film Cartridge installed.
b. Close the Printer Cover.
c. Click on the Calibrate button.
f. Click on the OK button to close the screen.
d. If successful the printer‟s LCD will reset to ready.
Option2 NOTE: Calibration of the Ribbon, Film, and Lamination may also be
performed from the DISPLAY ICON.
a. Leave the Film Cartridge installed
b. Close the Prin
ter‟s Cover.
c. Select Film Calibrate option from the Display.
d. If successful the printer‟s LCD will reset to ready.