HID FARGO HDP8500 User Guide - Manual (Page 74)

© 2012 HID Global Corporation. All rights reserved.
74
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Using the Options Group
The functions under the Options Group are described in this section.
Using the Rotate Front 180 Degrees or Rotate Back 180
Degrees options
Use this option to change the position of the printed image in relation to the set location of a
card's Magnetic Stripe or smart chip.
Step Procedure
1 Select the Rotate Front 180 Degrees option to rotate the image on the front
of the card by 180 degrees when printedOR
Select the Rotate Back 180 Degrees option to rotate the image on the back
of the card by 180 degrees when printed.