Loading the blank cards – HID FARGO HDP8500 User Guide User Manual
Page 51
Advertising
© 2012 HID Global Corporation. All rights reserved.
51
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Loading the Blank Cards
Step Procedure
1
Unlock and open the Card Input Cartridge.
Leave the cartridge in the Printer, There is no need to completely remove the
cartridge to load cards.
2
Load the cards into the cartridge.
Important: The front of the card must face DOWN. The back of the card
or the magnetic stripe on the card must face UP. The Smart Chip is
loaded on the bottom.
3
Place the Card Weight on top of each stack of cards.
Advertising