HID FARGO HDP8500 User Guide User Manual
Page 61
Advertising
© 2012 HID Global Corporation. All rights reserved.
61
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Once the temperature has been increased 4 times (20 degrees), reset
temperature to default and increase the Dwell Time by .5 second.
Repeat this process until adequate adhesion is achieved.
Ensure that the cards (in use) have a surface roughness (Ra) of 60 micro
inches or less.
This information should be available from the card manufacturer.
Advertising