HID FARGO HDP8500 User Guide - Manual (Page 83)

© 2012 HID Global Corporation. All rights reserved.
83
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Using the Advanced Image Color window
Step Procedure
1 Click on the Advanced Settings button to bring up the Advanced Image Color
window. See below.
2 For the Image Quality slider bar controls, see below.
Click OK to accept any variance from the default (for this specific slider bar)
and return to the Image Color tab window.
Click Cancel to negate any variance on the slide and return to the Image
Color tab window.
Click on the Default button to clear changes back to the default settings for
this window only.
In addition, here are further instructions:
Sharpness (Default, 0%): Move the slide to the left for (-) or less sharpness.
Move the slide to the right (+) or more sharpness of the printed image. Study
the image (on the right) to determine correct sharpness.
Contrast (Default, 0%): Move the slide to the left for (-) or less contrast.
Move the slide to the right (+) or more contrast of the printed image. Study
the image (on the right) to determine correct contrast.
Gamma (Default, 0%): Move the slide to the left for (-) or less gamma. Move
the slide to the right (+) or more gamma of the printed image. Study the
image (on the right) to determine correct gamma.