Using the blush point option, Using the lcd contrast option, Using the film supply transfer tension option – HID FARGO HDP8500 User Guide User Manual
Page 134: Using the film take-up transfer tension option
![background image](/manuals/433165/134/background.png)
© 2012 HID Global Corporation. All rights reserved.
134
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Using the Blush Point Option
The blush point is compensation during printing:
There is no dye transfer.
There is no a light gray line on a portion of the card.
It should be white.
Using the LCD Contrast Option
Use this setting to adjust the brightness of the LCD panel.
Using the Film Supply Transfer Tension Option
Adjustments significantly change image length. Only small adjustments recommended because
of sensitivity. (Note: Adjustments affect flash and smudge.)
Using the Film Take-up Transfer Tension Option
“-” Adjustments can cause card jams
.
(Note:
“+” Adjustments can help stop jamming.
Adjustments affect flash and smudge.)