HID FARGO HDP8500 User Guide - Manual (Page 165)

© 2012 HID Global Corporation. All rights reserved.
165
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
(PC Error Message
No. 245) Laminator. restart the Printer.
Lam Card Jam
(PC Error Message
No. 53, 212, 214, and
215, 216)
A jam occurred somewhere
between the Printer and the
Laminator.
Card can't be ejected from
laminator.
Open covers and clear the
obstruction/jam.
The Lamination material is stuck to
the card.
Lam Com Error
(PC Error Message
No. 246)
There was a communication
failure between the Printer
and Laminator. Check Lam power/connections and
restart the Printer.
Lam Card Jam-
Not Ejected
(PC Error Message
No. 216)
The card is not ejected from
the Laminator. The Lamination material is stuck to
the card.
Lam Timeout
(PC Error Message
No. 247)
The Printer timed out while
processing information
related to the Laminator. Check Lam power/connections and
restart the Printer.
Lam No Film
(PC Error Message
No. 63)
No laminate installed in
cartridge Load Laminate into cartridge.
Lam1 Wrong Film
(PC Error Message
No. 237)
Material in Cartridge 1 of the
Laminator does not match
the material type specified
by the job. Make sure Driver material matches
what is actually in the Laminator.
Lam2 Wrong Film
(PC Error Message
No. 238)
Material in Cartridge 2 of the
Laminator does not match
the material type specified
by the job. Make sure Driver material matches
what is actually in the Laminator.
Laminate 1 Bad
(PC Error Message
No. 233, 235, 227,
225, 223,263, 261,
249)
The Lamination material in
Cartridge 1 is not valid for
this Laminator.
The wrong Securemark lam
material was installed in
cartridge.
The wrong OEM material
was installed in cartridge
one.
The wrong grade material
Install valid material.