Using the print tof (top of form) option – HID FARGO HDP8500 User Guide User Manual
Page 128
Advertising
© 2012 HID Global Corporation. All rights reserved.
128
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Using the Print TOF (Top of Form) Option
Follow these instructions:
Step
Procedure
1
Print the alignment card self-test (The front edge should look like figure below).
2
Adjust the Print TOF until the green border is eliminated and the entire
Transfer Alignment Block is shown in the center of the card. Note
– due to
variation in roller alignment, the green border may appear at a slight angle on
the top of the card.
Advertising