HID FARGO HDP8500 User Guide - Manual (Page 72)

© 2012 HID Global Corporation. All rights reserved.
72
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
(Note #2: This option is not available if using a YMCKH Ribbon
Using the Print Both Sides - Print Back Image on Front of
Card option
This option becomes active when Print Both Sides is checked. The Default is active and
unchecked.
Step Procedure
1 Select this option:
If you need to print the first page of a two-page document on the
backside of the card
OR
If you need to print the resin black on the chip-side of the Smartcard.
The second page of the document will be printed on the front side of the
card.
Using the Dual Sided - Print Back Side Only option
Use this option to print only onto the backside of cards. (Note: The Print Back Side Only
checkbox default is active and unchecked.)
Step Procedure
1 Select this option to print only onto the backside of preprinted cards that must
have their Magnetic Stripe or smart card chip encoded. (Note: Load the