JLG X700AJ Operator Manual - Manual (Page 107)

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3128790 – JLG Lift – 6-11
Engine Cooling System and Fluid (if equipped)
Interval - Check daily. Replace fluid every 500 hours
NOTE: Coolant utilized is to be compliant with SAE J 1034
Hydraulic Oil
l
Lube Point(s) - Fill Cap
Capacity - 12.7 gallons (48 liters)
Interval - Check level daily. Change every two years or 1200
hours of operation
NOTE: Hydraulic oil levels are to be checked with the
machine in transport position while on a firm, level
and uniform surface. Oil level must be half-way in the
level indicator (Indicator-A). To add hydraulic oil use
(cap-B).
Perkins Diesel
A
B