JLG X700AJ Operator Manual - Manual (Page 58)

SECTION 4 - MACHINE OPERATION
4-12 – JLG Lift – 3128790
Operating with Outriggers Set to 24° -
Restricted Work Area Of Operation
(See Figure 4-4. and Figure 4-5.)
NOTE: The swing and jib functions will not be allowed in cer-
tain areas.
If at least one of the outriggers is set in the restricted area posi-
tion (24°), the platform/remote control box LCD will display the
symbol for restricted area operation in position 1 which is
always visible during the use of the machine in this set up.
DO NOT OPERATE IF THE SYMBOL FOR RESTRICTED AREA OF
OPERATION IS NOT DISPLAYED ON THE LCD SCREEN WHEN ANY
OF THE OUTRIGGERS ARE IN THE RESTRICTED AREA POSITION.
If you try to position the boom outside the allowed working
area by rotating the boom, the movement will be stopped and
a message on the LCD display will appear indicating that it is
necessary to rotate in the opposite direction in order to keep
working.
The following illustrations (Figure 4-4. and Figure 4-5.) show
the various areas of allowable boom rotation and jib extend
operation for the different outrigger settings.
Unless all four (4) outriggers are set to "full work area position"
jib extend is restricted to the +/– 20° rotation area shown as
shaded areas in (Figure 4-4. and Figure 4-5.).