JLG X700AJ Operator Manual - Manual (Page 23)

SECTION 2 - PREPARATION AND INSPECTION
3128790 – JLG Lift – 2-3
Table 2-1.Inspection and Maintenance Table
Type Frequency
Primary
Responsibility
Service
Qualification
Reference
Pre-Start Inspection Before using each day; or
whenever there’s an Operator change. User or Operator User or Operator Operation and Safety Manual
Pre-Delivery Inspection
(See Note) Before each sale, lease, or rental delivery. Owner, Dealer, or
User Qualified JLG
Mechanic Service and Maintenance
Manual and applicable JLG
inspection form
Frequent Inspection In service for 3 months or 150 hours, whichever
comes first;
or
Out of service for a period of more than 3
months;
or
Purchased used. Owner, Dealer, or
User Qualified JLG
Mechanic Service and Maintenance
Manual and applicable JLG
inspection form
Annual Machine Inspection Annually, no later than 13 months from the date
of prior inspection.
Owner, Dealer, or
User Factory Trained
Service Technician
(Recommended) Service and Maintenance
Manual and applicable JLG
inspection form
Preventative Maintenance At intervals as specified in the Service and Main-
tenance Manual. Owner, Dealer, or
User Qualified JLG
Mechanic Service and Maintenance
Manual
NOTE: Inspection forms are available from JLG. Refer to Section 6 - Operators Maintenance when performing inspections.