JLG X700AJ Operator Manual User Manual
Page 96
SECTION 5 - EMERGENCY PROCEDURES
5-16
– JLG Lift –
3128790
assembly to go out of the working area related to that
outrigger configuration.
Movement Of The Tracks With The Machine Not Aligned:
OPERATION ONLY ALLOWED TO GO TO A CONDITION
SUITABLE TO CARRY OUT THE PROCEDURE INDI-
CATED IN "MACHINE REALIGNMENT" ABOVE. ALL
OTHER USE IS PROHIBITED.
1. Open the electric components compartment;
2. Locate and use the safety device bypass key as
described above;
3. Activate the safety device bypass key by turning it in a
clockwise direction and holding it in position (see
decal);
4. The safety devices BYPASS icon will appear
on the platform/remote control box display.
5. Operate the drive/steer controls with
extreme caution.
6. Move the machine to a proper location to perform
"Machine Realignment" procedure to realign the
machine.
7. At the end of the operation release the key and store it
as is described above.
The control circuit board records every activation of the
safety device bypass key.