JLG X700AJ Operator Manual User Manual
Page 116
SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6-20
– JLG Lift –
3128790
ST2 OPEN A
Both ON indicate the stabilizer 2 is completely open,
TOTAL AREA
ST2 OPEN B
ST3 OPEN A
Both ON indicate the stabilizer 3 is completely open,
TOTAL AREA
ST3 OPEN B
ST4 OPEN A
Both ON indicate the stabilizer 4 is completely open,
TOTAL AREA
ST4 OPEN B
BYPASAE A
Both ON indicate aerial part safety devices have been
disconnected by the specially provided key.
BYPASAE B
BYPASCB A
Both ON indicate undercarriage part safety devices have
been disconnected by the specially provided key.
BYPASCB B
EM. GRND A
Both ON indicate that emergency stop button isn't
pressed (from ground).
EM. GRND B
FOTO A
Both ON indicate that the photocells are aligned.
FOTO B
EM R.C. GND
Both ON indicate that the remote control button isn't
pressed (from ground).
ST12 CLOSED
ON status indicates the stabilizers 1-2 are completely up
and pressurized.
ST34 CLOSED
ON status indicates the stabilizers 3-4 are completely up
and pressurized.
TEMP ALRM A
Both ON indicate the external temperature probe is acti-
vated (only Russian version).
TEMP ALRM B
GENERATOR
ON or OFF depending on whether, the engine is ON or
OFF.
EMERG. COMM ON position indicates the emergency buttons are acti-
vated.
MICROROPES
ON position indicates both cables are working.
START M. TE
ON position indicates the engine start button (from
ground) is pressed.
MOTOR TEMP.
OFF position with the engine running indicates the alarm
is activated.
MOTOR PRESS. ON position with the engine running indicates the alarm
is activated.
START M. EL
ON position indicates the remote control from ground is
activated by the provided key.
MICROJIB A
Both ON indicates the JIB arm is completely closed.
MICROJIB B
PEDALE
ON position indicates the pedal within the basket is
pressed. (only pedal version)
EM BASK. A
Both ON indicates the emergency STOP (of the remote
control) within the basket isn't pressed
EM BASK. B
POSM 1 A
Both ON indicates the stabilizer 1 is in stabilization posi-
tion.
POSM 1 B
POSM 2 A
Both ON indicates the stabilizer 2 is in stabilization posi-
tion.
POSM 2 B