Raise and lower the tower boom, Raise and lower the main boom, Telescope the main boom – JLG X700AJ Operator Manual User Manual
Page 66: Platform rotation (item 20, figure 4-6.), Raise and lower the jib (item 21, figure 4-6.)
SECTION 4 - MACHINE OPERATION
4-20
– JLG Lift –
3128790
• To manually Level Down, turn the select switch counter
clockwise and hold until desired position is reached.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR
SLIGHT LEVELING OF THE PLATFORM. INCORRECT USE COULD
CAUSE THE LOAD/OCCUPANT TO SHIFT OR FALL. FAILURE TO DO
SO COULD RESULT IN DEATH OR SERIOUS INJURY.
Raise And Lower The Tower Boom
(Item 17, Figure 4-6.)
• To raise the tower boom, depress the foot switch and
move the controller forward.
• To lower the tower boom, depress the foot switch and
move the controller backwards.
Raise And Lower The Main Boom
(Item 18, Figure 4-6.)
• To raise the main boom, depress the foot switch and
move the controller forward.
• To lower the main boom, depress the foot switch and
move the controller backwards.
Telescope The Main Boom
(Item 19, Figure 4-6.)
• To extend the main boom, depress the foot switch and
move the controller backward.
• To retract the main boom, depress the foot switch and
move the controller forward.
Platform Rotation
(Item 20, Figure 4-6.)
• To rotate the platform to the right, depress the footswitch
and move the controller forward.
• To rotate the platform to the left, depress the footswitch
and move the controller backwards.
Raise And Lower The Jib
(Item 21, Figure 4-6.)
• To raise the jib, depress the foot switch and move the
controller forward.
• To lower the jib, depress the foot switch and move the
controller backwards.
Swinging The Boom
(Item 22, Figure 4-6.)
WHEN SWINGING THE BOOM MAKE SURE THERE IS AMPLE ROOM
FOR THE BOOM AND UPRIGHT TO CLEAR SURROUNDING WALLS,
PARTITIONS AND EQUIPMENT.
If the turntable is rotated with the tower boom too low or the
tower boom is lowered near an outrigger, Those functions will
stop before contact with an outrigger. The display on the plat-
form/remote control box will indicate to swing in the opposite
direction or lift up.
• To swing the boom to the right, depress the foot switch
and move the controller forward.
• To swing the boom to the left, depress the foot switch
and move the controller backwards.