JLG X700AJ Operator Manual - Manual (Page 55)

SECTION 4 - MACHINE OPERATION
3128790 – JLG Lift – 4-9
After these conditions have been met, make sure that there are
no obstacles in the Jib working area and operate as follows:
• Activate the joystick for moving the JIB arm. If a different
joystick is activated an error message will appear on the
display.
• After the slope has been passed, for which the jib had to
be raised, fully lower the jib and continue travelling.
• With the JIB raised, ALWAYS travel at minimum speed
and keep the JIB as near as possible to the ground.