JLG SSV10 Service Manual - Manual (Page 102)

SECTION 6 - TROUBLESHOOTING
6-10 – JLG Lift – 3121187
6.6 SPECIFICATIONS FOR VARIOUS COMPONENTS
The following table contains specifications for machine components.
6.7 SPECIAL PIN EXTRACTOR TOOLS FOR ELECTRICAL CONNECTORS
The following table contains pin extractor tools for machine electrical connector components.
Table 6-2. Ohm Ratings for Various Components
COMPONENT NOMINAL RESISTANCE @ TEMPERATURE RESISTANCE RANGE POSSIBLE
Pump Motor 0.2ohm - 0.4ohm @ 77deg F 0.12ohm - 0.49ohm
Brake Coil 44.7ohm - 52ohm @ 68deg F 31.4ohm - 65.3ohm
Drive Motor (Bodine) .1 to .3ohm
(Can change depending on the rotation of the
armature and temperature.)
N/A
Table 6-3. Amperage Draw for Various Components
COMPONENT AMPERAGE
Ground Control Module 95 Amps @ room temperature with rated load
Traction Control Module
LEVEL SURFACE
(24V) (RATED LOAD)
15% GRADE
(24V) (RATED LOAD)
NO LOAD (24V)
7 to 11 Amps
(per motor)
55 to 60 Amps
(per motor)
3.5 to 4.8 Amps
78 to 86 RPM
Table 6-4. Special Pin Extractor Tools for Electrical Connectors
COMPONENT DESCRIPTION JLG PART NUMBER ILLUSTRATION
Ground Control Station For removal of electrical
connector pins from the
Ground Control Station
connectors. 7016618
Drive Motor For removal of electrical
connector pins from the
Drive Motor main power
connectors.
7002841
Drive Motor Brake For removal of electrical
connector pins from the
Drive Motor Brake power
connectors.
7002842