Lenze E84Dxxxxx - Manual (Page 22)

3 Safe configuration
22
Lenze · 8400 protec · Drive-based safety · Software Manual · DMS 2.4 EN · 05/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3 Safe configuration
The drive-based safety system can be safely configured in the »Engineer« on the Safe configuration
tab for the SM301 safety module
[3-1] Example: Safe configuration tab for safety option 30
The parameters of the drive-based safety system are divided into different groups according to their
functions.
• A group is selected via the Parameter groups  list field.
• Some parameter groups are divided into functional subgroups for a better overview which can
be selected via the buttons  on the left.
• General parameters ( 25)
• Safe inputs ( 42)
(Safe inputs SD-In1 and SD-In2 are only available in connection with the safety option 30.)
• Stop functions ( 27)
• Operation mode selection ( 31)
• Safety bus ( 33)
• In the parameter list  all parameters of the parameter group/subgroup selected are displayed.
• The Value field serves to change the corresponding parameter value.
 Change parameter settings ( 23)
• The context menu (right mouse button) provides functions for the import/export of the
parameter settings.
 Import/export parameter settings ( 24)

Tip!
If you put the mouse pointer over a parameter, further information on the parameter will
be displayed in a pop-up window.
If you select the entry "All parameters" in the Parameter groups list field, all parameters of
the drive-based safety system are displayed on the tab.
The FilePrint command in the »Engineer« menu bar serves to print all parameter settings
of the drive-based safety system for the purpose of documentation.