Lenze E84Dxxxxx - Manual (Page 47)

Lenze · 8400 protec · Drive-based safety · Software Manual · DMS 2.4 EN · 05/2013 · TD05
47
6 Safe parameter transfer
6.3 Write parameter set into file
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.3 Write parameter set into file

How to write the parameter set into a file:
1. Go to the Safe transfer dialog box and click Write file.
• The Safe parameter set dialog box is displayed.
2. Select the directory from the Save in list field, in which the file is to be saved.
3. Enter a file name into the File name input field.
4. Click Save.
• The current parameter settings are saved in the selected parameter set file (*.bin) and
the Save parameter set dialog box is closed.
• After this, a status message displays whether the action could be carried out
successfully.
5. Confirm the status message with OK.
6.4 Read parameter set out of file

How to read the parameter set out of the file:
1. Go to the Safe transfer dialog box and click Read file.
• A confirmation prompt appears asking whether the data is really to be uploaded and the
parameter settings in the »Engineer« are to be overwritten.
2. Answer the confirmation prompt with Yes to continue the action.
• The Read parameter set dialog box is displayed.
3. Select the directory which contains the file to be read from the Search in list field.
4. Enter the name of the file to be read into the File name input field.
5. Click Open.
• The current parameter settings are overwritten with the settings of the selected
parameter set file (*.bin) and the Open parameter set dialog box is closed.
• After this, a status message displays whether the action could be carried out
successfully.
6. Confirm the status message with OK.

Note!
This function serves to overwrite the parameter settings in the »Engineer« with the
settings of the selected parameter set file (*.bin)!