Lenze E84Dxxxxx - Manual (Page 4)

1 About this documentation
1.1 Document history
4
Lenze · 8400 protec · Drive-based safety · Software Manual · DMS 2.4 EN · 05/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
1 About this documentation
The manual contains the complete information on the application as directed of the decentralised
controllers 8400 protec with drive-based safety (safety option 20 and 30).
Target group
This manual is intended for all persons who want to parameterise, configure, and diagnose the
integrated safety systems in controllers of the 8400 protec series with the L-force »Engineer«
engineering software.
Validity
The information given in this manual applies to 8400 protec controllers with the following
nameplate data:
Screenshots/application examples
All screenshots provided in this documentation are application examples. Depending on the
software version of the controller and the version of the installed »Engineer« software, the
screenshots in this documentation may differ from the representation in the »Engineer«.

Tip!
Information and tools for Lenze products are provided in the download area at
http://www.Lenze.com  Download
1.1 Document history

Please read the mounting instructions supplied with the controller before you start
working!
The mounting instructions contain safety instructions that must be observed!
Product series Type designation From software version
8400 protec StateLine
with safety option 20 E84DSWTxxxxxxN0xxx-xKxxS 01.00
with safety option 30 E84DSWTxxxxxxN0xxx-xLxxS 01.00
8400 protec HighLine
with safety option 20 E84DHWTxxxxxxN0xxx-xKxxS 01.00
with safety option 30 E84DHWTxxxxxxN0xxx-xLxxS 01.00
Version Description
2.4 05/2013 TD05 Corrections
2.3 01/2013 TD05 Converted to new layout
2.2 02/2010 TD14 Corrections
2.1 11/2009 TD14 Corrections
2.0 09/2009 TD14 Corrections and extension by safety option SO20
1.0 05/2009 TD14 First edition