Lenze E84Dxxxxx - Manual (Page 50)

7 Parameter reference
7.1 Parameter list
50
Lenze · 8400 protec · Drive-based safety · Software Manual · DMS 2.4 EN · 05/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7 Parameter reference

Tip!
General information on parameters can be found in the online documentation for the
controller.
7.1 Parameter list
This chapter lists all parameters of the safety option 30 in numerically ascending order.

Note!
This chapter supplements the parameter list and the table of attributes provided in the
online documentation for the controller by parameters of drive-based safety system.

Note!
Parameter settings are only possible via the Safe configuration tab!
 Safe configuration ( 22)
Only read access is possible to the parameters of the drive-based safety system via the
»Engineer« parameter list (tab All parameters  category Safety Option 30) and the
keypad!