RKI Instruments Gas Tracer 10,000 ppm - Manual (Page 18)

11 • Optional Accessories 10,000 ppm Gas Tracer Operator’s Manual
Belt Clip
A belt clip can be mounted to the back of the case using 3 phillips
head screws. The belt clip allows the Gas Tracer to be securely
attached to a belt.
Wrist Strap
A wrist strap is included with the Gas Tracer and can be attached to the right
or left wrist strap installation feature.
Sample Hose & 10 Inch Probe
A 10 foot sample hose and a 10 inch probe are included as standard
with the Gas Tracer. When desired, the rubber nozzle may be removed
and the sample hose and 10 inch probe may be connected to the inlet
fitting. Sample hose lengths are available from 10 feet to 50 feet (see
“Parts List” on page 95). The quick connect end of the sample hose
connects to the inlet fitting of the Gas Tracer and the probe screws
onto the end of the hose with the threaded fitting.
CAUTION: Sample hose lengths of more than 50 feet are not recommended
for the Gas Tracer because of flow rate reduction.
Figure 4: Sample Hose and Probe
Optional Accessories
Several optional accessories are available for the Gas Tracer. They
include a rechargeable lithium ion battery pack, battery charging
stations, and various special probes. The most commonly used
optional accessories are described below. Detailed instructions
regarding the use of these and other available accessories are included
in other parts of this manual. Data logging accessories are briefly
described in “Data Logging” on page 34.
Sample Hose
Probe