RKI Instruments Gas Tracer 10,000 ppm - Manual (Page 21)

10,000 ppm Gas Tracer Operator’s Manual Optional Accessories • 14
interruption of sampling and a low flow alarm if the probe tip is
blocked.
• 30 inch stainless steel probe
Figure 8: 30 Inch Stainless Steel Probe
This probe is physically the same as the 30 inch aluminum probe
and is intended for applications where a high level of corrosion
resistance is required in the long probe tube.
• 32 inch telescoping probe with dust filter
Figure 9: 32 Inch Telescoping Probe with Dust Filter
This probe is designed for use where it is necessary to put the
probe tip in areas not accessible with the 10 inch probe with dust
filter and applications where the probe tube must be collapsible for
storage.
• 7 foot telescoping probe with dust filter
Figure 10: 7 Foot Telescoping Probe with Dust Filter
This probe is designed for use where it is necessary to put the
probe tip in areas not accessible with the 32 inch telescoping probe
with dust filter and applications where the probe tube must be
collapsible for storage.