Rockwell Automation 20-COMM-R Remote I/O Adapter - Manual (Page 122)

Index-2
20-COMM-R Remote I/O Adapter User Manual
Publication 20COMM-UM004D-EN-P
D
Datalink Size parameter, B-1
Datalinks
definition, G-2
enabling in the adapter, 3-6
in Block Transfer I/O, 4-8
decimal/octal equivalent rack addresses, 3-3
diagnostic items, 6-3
dimensions, A-1
disabling all hardware switches, 2-3
Discrete I/O
Block Transfer Control/Status words, 4-4
image for
1/2 rack configuration, 4-3
1/4 rack configuration, 4-2
Logic Command/Status, 4-4
Reference/Feedback, 4-4
DPI
connector on adapter, 1-1
data rates, A-1
definition, G-2
Internal Interface cable, 2-4, 2-5
peripheral, G-3
products, 1-3, G-3
DPI Alarm object, C-17
DPI Data Rate parameter, B-1
DPI Device object, C-3
DPI Fault object, C-15
DPI I/O Active parameter, B-3
DPI I/O Config parameter, B-3
DPI Parameter object, C-5
DPI Port parameter, B-1
DPI Time object, C-19
DriveExecutive software
adapter configuration tool, 1-4, 3-1
definition/website, G-3
DriveExplorer software
adapter configuration tool, 1-4, 3-1
definition/website, G-3
drives, see PowerFlex drives
DriveTools SP software,
G-3
E
EEPROM, see Nonvolatile Storage (NVS)
environmental specifications,
A-1
equipment required, 1-3
events
clearing/viewing, 6-5
list of, 6-6
Explicit messages, see Block Transfer messages
F
fault action
configuring the adapter for, 3-7
definition, G-3
fault configuration
configuring the adapter for, 3-8
definition, G-3
faults, see events
features,
1-2
firmware
revision, P-1
update guidelines, 3-10
Flt Cfg A1-D2 In parameters, B-4
Flt Cfg Logic parameter, B-3
Flt Cfg Ref parameter, B-3
formatting Block Transfer messages, 5-2
G
grounding the adapter, 2-6
H
HIM (Human Interface Module)
accessing parameters with, 3-2
definition, G-4
LCD model, 3-2
LED model, 3-2
hold last
configuring the adapter for, 3-7
definition, G-4