Rockwell Automation 20-COMM-R Remote I/O Adapter - Manual (Page 124)

Index-4
20-COMM-R Remote I/O Adapter User Manual
Publication 20COMM-UM004D-EN-P
PORT status indicator
locating, 6-1
troubleshooting with, 6-2
power consumption, A-1
PowerFlex drives
compatible with adapter, 1-3
definition, G-5
HIM, 3-2
installing adapter on, 2-4
preparing for an installation, 2-1
processor, see controller
programmable logic controller, see controller
Q
quick start, 1-6
R
rack address
definition, G-5
setting with parameter, 3-3
setting with Rack Address Rotary Switches,
2-2
rack size
definition, G-5
setting with parameter, 3-5
setting with switch SW4, 2-3
Rack Size parameter, B-4
Ref/Fdbk Size parameter, B-1
Reference/Feedback
definition, G-5
in Block Transfer I/O, 4-8
in Discrete I/O, 4-4
regulatory compliance, A-2
related documentation, P-2
Remote I/O network
baud rates, A-1
cable, 2-1, 2-7
connector on adapter, 1-1
definition, G-6
termination resistor, 2-8
required equipment, 1-3
Reset Module parameter, B-2
resetting the adapter, 3-8
ribbon cable, see Internal Interface cable
RIO Addr Actual parameter,
B-1
RIO Addr Cfg parameter, B-1
RIO Rate Actual parameter, B-1
RIO Rate Cfg parameter, B-1
RSLinx Classic software documentation, P-3
RSLogix 5/500/5000 software, G-5
S
safety precautions, 1-5
scanner, G-6
SLC 500 controller
example program for Block Transfer
messaging, 5-12
example programs for Discrete and Block
Transfer I/O, 4-17
specifications for adapter, A-1
Start RIO Group parameter, B-4
starting module group
definition, G-6
setting with parameter, 3-4
setting with switches SW1 and SW2, 2-3
status indicators
definition, G-6
locating, 6-1
MOD, 6-1, 6-2
NET A, 6-1, 6-3
NET B (not used), 6-1
normal operation, 2-8
PORT, 6-1, 6-2
troubleshooting with, 6-2 to 6-3
understanding, 6-1
switches
Configuration DIP Switches, 2-3
disabling all hardware switches, 2-3
for setting
adapter configuration, 2-3
rack address, 2-2
Rack Address Rotary Switches, 2-2
Switches parameter, B-4
T
technical support, P-2
termination resistor for Remote I/O network, 2-8
tools required, 1-3
troubleshooting, 6-1 to 6-6