Remove and install the him – Rockwell Automation 20C PowerFlex 700H Drives Programming User Manual
Page 86
Advertising
![background image](/manuals/577164/86/background.png)
86
Rockwell Automation Publication 20C-PM001F-EN-P - March 2012
Appendix A
HIM Overview
Remove and Install the HIM
The HIM can be removed or installed while the drive is powered.
IMPORTANT
HIM removal is only permissible in Auto mode. If the HIM is removed while in
Manual mode or the HIM is the only remaining control device, a fault will occur.
Step
Key(s)
Example Displays
To remove the HIM . . .
1. Press ALT and then Enter (Remove). The Remove
HIM confirmation screen appears.
2. Press Enter to confirm that you want to remove
the HIM.
3. Remove the HIM from the drive.
To install HIM . . .
1. Insert into drive or connect cable.
ALT
+
- Remove HIM -
Do you wish to
continue?
Press Enter
Advertising