Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual - Manual (Page 176)

176 Rockwell Automation Publication 1789-UM002J-EN-P - December 2012
Appendix A Communicate with Devices on a DeviceNet Network
The Full Scanlist dialog box appear.
The I/O data is automatically loaded into the scanlist from the device’s
EDS file with default parameters set. If you want to change I/O Parameters
for a device, perform the following steps.
a. Click each device to enable the Edit I/O Parameters dialog box.
b. Set the parameters for each device and click OK.
Click each device
to enable Edit I/O
parameters.