Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual - Manual (Page 23)

Rockwell Automation Publication 1789-UM002J-EN-P - December 2012 23
What is the SoftLogix System? Chapter 2
SoftLogix System Description
The same RSLogix 5000 software supports program development for all Logix
controllers. The system can make a connection through a 1784-PCICS card via
the ControlNet network, through a 1784-PCIDS card via the DeviceNet
network, and through a standard EtherNet port via the EtherNet/IP network.
SoftLogix supports two types of motion cards; the 1784-PM02AE analog
motion card and the 1784-PM16SE SERCOS motion card.
Figure 1 - The SoftLogix System at a Glance
Analog
Analog Drives
EtherNet/IP Connection
SoftLogix
IMPORTANT Regardless of the product you have, choose 1789-L60/A in RSLogix 5000
software when you specify a controller type.