Card – Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual User Manual
Page 201
Advertising
Rockwell Automation Publication 1789-UM002J-EN-P - December 2012
201
Communicate with Devices on a ControlNet Network
Appendix B
Step 4: Add Remote Communication Devices for the Communication
Card
Complete your system configuration by adding the remote communication
devices and appropriate I/O modules to your project. Follow these steps.
1. In RSLogix 5000 software, from the Controller Organizer, right-click the
1784-PCICS communication card you added, then choose New Module
to add a ControlNet Adapter.
The Select Module dialog box appears.
Advertising