Step 3: create a view – Rockwell Automation 1789-L10_L30_L60 SoftLogix 5800 System User Manual User Manual
Page 182
Advertising
182
Rockwell Automation Publication 1789-UM002J-EN-P - December 2012
Appendix A
Communicate with Devices on a DeviceNet Network
The Port Configuration dialog appears indicating that the port has
been configured.
5. Click OK.
Step 3: Create a View
1. From the Setup menu, choose Create View.
The View Creation Parameters dialog box appears.
2. Choose the port name matching the port for the view you are creating.
3. Click the Message Type (input, output, or input/output) that you want to
use for the view you are creating.
Advertising